Sparcofloor WBE 410
Water-based two-component epoxy coating
SPARCOFLOOR WBE 410 is a water-based epoxy as a primer and top-coat system. It is suitable to be applied on dry or damp surface. It is also an ideal choice for concrete primers, asphalt surface primer and metal surface.
Technical details
- Uses
- SPARCOFLOOR WBE410 is recommended in the following applications.; For coloured seal coat onto cementitious screed.; For use on normal to medium heavy exposure, in the warehouse flooring, rubbish chute coatings, production floors, car park decks, etc.; For use as primer and top-coat system onto Concrete, New concrete.
- Features
- Ready to use packing ensure correct mixing and ease of application within designed pot life which allows efficient work progress.; Water-dilutable with good hiding properties.; Especially suitable for highly absorbent substrates.; Excellent adhesion to mechanically cleaned surfaces.; Suitable for use in unventilated area.; Versatile usage with its high mechanical properties and good anti-corrosive resistance.
- Surface preparation
- Substrate must be dry, sound, clean, and free from oil, grease, loose material, surface contaminants and other bond-inhibiting materials.; Concrete substrates must be prepared mechanically by ball blasting, milling or diamond grinding.; Weak concrete must be removed and surface defects such as blowholes and voids must be fully exposed.; Any imperfections such as cracks, holes, and gouges should…
- Coverage
- It is recommended to apply SPARCOFLOOR WBE 410 at a rate of 6-8 m2 / kg / coat. Coverage may vary slightly depending on the prepared substrate condition.
- Packaging
- Product Packaging SPARCOFLOOR WBE 410 Available in Standard colours Part A 4 kg/ Part B 1 kg (per set) OR Part A 16 kg/ Part B: 4 kg (per set).
- Safety
- PRECAUTION After hardening thoroughly, SPARCOFLOOR WBE 410 is physiologically harmless. Keep the resin and hardener away from the eyes, mouth and skin. Do not breathe in the vapours. The uncured mixture can cause irritation of the skin. For best protection, wear rubber or plastic gloves. In case of contaminant, wipe away resin or hardener immediately from skin using paper towels and then wash…
- Limitations
- Minimum substrate temperature 5 °C Maximum permissible moisture content of concrete substrate 5% Minimum temperature for mixing +10 °C min. Minimum temperature for curing +10 °C min. / +35 °C max. Minimum adhesion strength of pre-treated substrate >1.5 N/ mm2 Minium compressive strength 25.0 N/ mm2 Consumption: It is recommended to apply SPARCOFLOOR WBE 410 at a rate of 6-8 m2 / kg / coat.…
From the Technical Data Sheet. Confirm the full specification with our technical team before application.
Suitable For
Related Products
EcoTough Floor Primer
Water-based acrylic floor primer
EcoTough Floor primer is an eco-friendly, one component Water based primer, sealer and bonding agent prior for application of Eco Tough Floor Topcoat. Primer can be broadcasted with filler for subsequent application of EcoTough Floor Topcoat for an Anti-Slip Finish.
EcoTough Floor Topcoat
Water-based aliphatic urethane coating (two-component)
EcoTough Floor is an eco-friendly, two component high strength coating that can be enhanced with recycled glass for an Anti-Slip finish. It features a low VOC, low odour while demonstrating outstanding durability, and the ability to withstand high UV conditions. It is being crosslinked with an aliphatic crosslinker, which allows for excellent adhesion to concrete and mineral substrates that have been mechanically prepared. It exhibits low dirt pickup, good wet hiding, and long-lasting finishes.
Epoxy SF Bonding Primer #104
Epoxy-based bonding primer
Bonding primer classified in the manufacturer's Safety Data Sheet as an epoxy-based system. A full technical data sheet is available on request via the enquiry form.
Ask our technical team about Sparcofloor WBE 410
Get a recommendation, coverage estimate or site-specific advice from Sparco's technical team.