Market Segments
Aerospace
Hangar and MRO floors must carry point loads from aircraft and support equipment while resisting hydraulic fluids, fuels and constant traffic. Sparco combines epoxy bonding primers with self-smoothing epoxy and polyurethane screed systems to deliver seamless, chemical-resistant floors built for aviation facilities.
- High point loads
- Hydraulic fluid & fuel resistance
- Seamless, dust-free finish
Which Sparco products are used for Aerospace?
Sparco recommends Epoxy SF Bonding Primer #104, Sparco 3-C Polyurethane Screed, Sparco Epoxy Bonding Primer #100, Sparcofloor 343, Sparcofloor SL 200 for Aerospace projects. Download each product's Technical Data Sheet (TDS) or request a specification from our technical team.
Recommended Products
Epoxy SF Bonding Primer #104
Epoxy-based bonding primer
Bonding primer classified in the manufacturer's Safety Data Sheet as an epoxy-based system. A full technical data sheet is available on request via the enquiry form.
Sparco 3-C Polyurethane Screed
Water-based polyurethane flooring screed
SPARCO 3-C Polyurethane Screed is a water-based with various coloured hybrid screed with good levelling and high chemical resistance system.
Sparco Epoxy Bonding Primer #100
Solvent-free epoxy primer
SPARCO EPOXY BONDING PRIMER #100 is a medium viscosity solvent free composition epoxy primer. Suitable to be applied on dry or damp surface. It is the ideal choice for concrete primers, asphalt surface primer and metal surface.
Sparcofloor 343
Two-component solvent-based polyurethane floor coating
Two-component solvent based polyurethane finishes consisting of blended polyester polyol resin with pigments and aliphatic polyisocyanate hardener. Retains its color and high gloss under strong ultraviolet condition. Provides both durable and decorative finish; excellent abrasion and chemical resistance. Benefits. Attractive colored floor. Increased abrasion resistance. Hygienic, easy to clean. Protects and dustproof Color Range. standard colors Standard Thickness. Applied thickness at 35 microns per coat Area of Use. Exterior industrial floors. Color and gloss retention required floors.
Sparcofloor SL 200
Self-smoothing, solvent-free epoxy flooring
SL 200 is a solvent-free, two-component epoxy flooring system that self-smoothing during application. It delivers high chemical resistance alongside exceptional mechanical strength.
Typical System Build-Up
A representative layered system for this segment, built from Sparco's primer, body and topcoat products.
Talk to us about your Aerospace project
Send us your floor plan, drawings or site photos and our technical team will recommend a complete system.