Sparcofloor SL 200
Self-smoothing, solvent-free epoxy flooring
SL 200 is a solvent-free, two-component epoxy flooring system that self-smoothing during application. It delivers high chemical resistance alongside exceptional mechanical strength.
Technical details
- Uses
- SPARCOFLOOR SL200 is recommended for the various applications:; Good resistant to mechanical loading and abrasion; Pharmaceutical facilities and clean room; Warehouses and Storage areas; Loading Bays; Assembly Halls; Plant Rooms, Clean Rooms; Garages; Production Areas; Maintenances workshops.
- Features
- 2-part Epoxy, solvent free, Self- Smoothing; Durable, Seamless; Easy to apply; Excellent adhesion to mechanically cleaned surfaces; Excellent impact and chemical resistant.
- Surface preparation
- Substrate must be dry, sound, clean, and free from oil, grease, loose material, surface contaminants and other bond-inhibiting materials.; Concrete substrates must be prepared mechanically by ball blasting, milling or diamond grinding.; Weak concrete must be removed, and surface defects such as blowholes and voids must be fully exposed. >>Any imperfections such as cracks, holes, and gouges should…
- Coverage
- Approximate 1.6 to 2.0 kg/m² applied as self-smoothing wearing, subject to filling grades. Coverage may vary slightly depending on the surface porosity of the substrate and surface conditions. The data serves as a guide and it is subject to the surface porosity, variation in level and/or wastage.
- Packaging
- Product Packaging SPARCOFLOOR SL200 Part A: 16 KG/ Part B: 4.0 KG (per set).
- Safety
- PRECAUTION After hardening thoroughly, SPARCOFLOOR SL 200 is physiologically harmless. Keep the resin and hardener away from the eyes, mouth and skin. Do not breathe in the vapours. The uncured mixture can cause irritation of the skin. For best protection, wear rubber or plastic gloves. In case of contaminant, wipe away resin or hardener immediately from skin using paper towels and then wash with…
- Limitations
- Minimum substrate temperature 5 °C Maximum permissible moisture content of concrete substrate 5% Minimum temperature for mixing +10 °C min. Minimum temperature for curing +10 °C min. / +35 °C max. Minimum adhesion strength of pre-treated substrate >1.5N/ mm2 Other applications information: *Waiting time to overcoat: Substrate temperature Minium/Maximum Temperature + 20°C 24 hours/ 2 days +30°C…
From the Technical Data Sheet. Confirm the full specification with our technical team before application.
Suitable For
Related Products
EcoTough Floor Primer
Water-based acrylic floor primer
EcoTough Floor primer is an eco-friendly, one component Water based primer, sealer and bonding agent prior for application of Eco Tough Floor Topcoat. Primer can be broadcasted with filler for subsequent application of EcoTough Floor Topcoat for an Anti-Slip Finish.
EcoTough Floor Topcoat
Water-based aliphatic urethane coating (two-component)
EcoTough Floor is an eco-friendly, two component high strength coating that can be enhanced with recycled glass for an Anti-Slip finish. It features a low VOC, low odour while demonstrating outstanding durability, and the ability to withstand high UV conditions. It is being crosslinked with an aliphatic crosslinker, which allows for excellent adhesion to concrete and mineral substrates that have been mechanically prepared. It exhibits low dirt pickup, good wet hiding, and long-lasting finishes.
Epoxy SF Bonding Primer #104
Epoxy-based bonding primer
Bonding primer classified in the manufacturer's Safety Data Sheet as an epoxy-based system. A full technical data sheet is available on request via the enquiry form.
Ask our technical team about Sparcofloor SL 200
Get a recommendation, coverage estimate or site-specific advice from Sparco's technical team.