← 所有产品
Sparco SB Prime 107
溶剂型环氧底漆
EpoxySolvent-based Primer
SPARCO SB PRIMER 107 是一款双组分溶剂型低粘度环氧底漆，与固化剂反应后形成持久耐用的涂层，是混凝土及矿物表面底漆的理想选择。
技术细节
- 用途
- SPARCO SB Prime 107 is recommended for the various applications:; Primer or surfacing onto prepared concrete surface, pavements, ramps, walkways, loading bay and industrial floors.; Primer onto existing concrete; Primer onto mineral substrate.
- 特点
- Ready to use packing ensure correct mixing and ease of application within designed pot life which allows efficient work progress.; Especially suitable for highly absorbent substrates.; Excellent adhesion to mechanically cleaned surfaces.; Excellent impact and chemical resistant coatings.; Suitable for use in unventilated area.
- 表面处理
- Substrate must be dry, sound, clean, and free from oil, grease, loose material, surface contaminants and other bond-inhibiting materials.; Concrete substrates must be prepared mechanically by ball blasting, milling or diamond grinding.; Weak concrete must be removed and surface defects such as blowholes and voids must be fully exposed.; Any imperfections such as cracks, holes, and gouges should…
- 理论用量
- It is recommended to apply SPARCO SB PRIME 107 at a rate of 5-6 m2 / litre / coat; minimum 2 coats for normal or dense concrete. Coverage may vary slightly depending on the surface porosity of the substrate and surface conditions.
- 包装
- Product Packaging SPARCO SB PRIME 107 Part A 10 litres/ Part B 10 litres (per set).
- 安全
- PRECAUTION After hardening thoroughly, SPARCO SB PRIME 107 is physiologically harmless. Keep the resin and hardener away from the eyes, mouth and skin. Do not breathe in the vapours. The uncured mixture can cause irritation of the skin. For best protection, wear rubber or plastic gloves. In case of contaminant, wipe away resin or hardener immediately from skin using paper towels and then wash…
- 限制条件
- Minimum substrate temperature 5 °C Maximum permissible moisture content of concrete substrate 5% Minimum temperature for mixing +10 °C min. Minimum temperature for curing +10 °C min. / +35 °C max. Minimum adhesion strength of pre-treated substrate >1.5N/ mm2 Consumption: It is recommended to apply SPARCO SB PRIME 107 at a rate of 5-6 m2 / litre / coat; minimum 2 coats for normal or dense…
摘自技术资料表(TDS)。施工前请与我们的技术团队确认完整规格。
相关产品
AcrylicWater-based Primer
EcoTough Floor Primer
水性丙烯酸地坪底漆
EcoTough Floor Primer 是一款环保型单组分水性底漆、封闭底漆兼粘结剂，用于在涂装EcoTough Floor Topcoat面漆之前使用。此底漆可撒布填料，以便后续施工EcoTough Floor Topcoat时形成防滑饰面。
PolyurethaneWater-based Topcoat
EcoTough Floor Topcoat
水性脂肪族聚氨酯涂料（双组分）
EcoTough Floor 是一款环保型双组分高强度涂料，可添加再生玻璃颗粒以形成防滑饰面。该产品具有低VOC、低气味的特点，同时表现出卓越的耐久性，并能承受高强度紫外线照射。它与脂肪族交联剂交联固化，对经过机械处理的混凝土及矿物基材具有优异的附着力。该涂料防污性佳、湿膜遮盖力好，饰面持久耐用。
向我们的技术团队咨询Sparco SB Prime 107
获取Sparco技术团队提供的产品建议、用量估算或现场专属建议。