← 所有产品
Sparco ElectroShield SL 110
无溶剂导电型环氧涂料（ESD防静电）
EpoxySolvent-freeESD ESD flooring
SPARCO ElectroShield SL 110 是一款高性能双组分无溶剂环氧地坪材料，适用于防静电（ESD）保护区域。该系统兼具优异的耐化学性与高机械强度的ESD地坪性能，是具有永久导电性的自流平饰面的理想选择。
技术细节
- 用途
- SPARCO ElectroShield SL 110 is recommended for the various applications:; Dissipative/ESD- compliant; Electronics facilities and Data Centres; High resistant to mechanical and chemical loading; Antistatic flooring and walls; Electromagnetic interference (EMI) and radio frequency interference (RFI) shielding; Pharmaceutical facilities, Aerospace Hangers; Warehouses and Storage areas.
- 特点
- High bond strength on concrete substrates; Solvent-free, Low VOC formulation; Electrostatically Conductive; Durable, seamless, and easy to clean; Excellent adhesion to mechanically cleaned surfaces; Excellent impact and chemical resistant coatings.
- 表面处理
- Substrate must be dry, sound, clean, and free from oil, grease, loose material, surface contaminants and other bond-inhibiting materials.; Concrete substrates must be prepared mechanically by ball blasting, milling or diamond grinding.; Weak concrete must be removed, and surface defects such as blowholes and voids must be fully exposed. >>Any imperfections such as cracks, holes, and gouges should…
- 理论用量
- It is recommended to apply SPARCO ElectroShield SL 110 minimum 2.25 kg binder with or without + 0.25 kg quartz sand. For Aesthetic demands, per coat (film thickness approximate 1.5 mm). Approximate 5 to 8 m²/L at 75 μm DFT. Coverage may vary slightly depending on the surface porosity of the substrate and surface conditions.
- 包装
- Product Packaging SPARCO ElectroShield SL 110 Part A: 16 KG/ Part B: 4 KG (per set).
- 安全
- PRECAUTION After hardening thoroughly, SPARCO ElectroShield SL 100 is physiologically harmless. Keep the resin and hardener away from the eyes, mouth and skin. Do not breathe in the vapours. The uncured mixture can cause irritation of the skin. For best protection, wear rubber or plastic gloves. In case of contaminant, wipe away resin or hardener immediately from skin using paper towels and then…
- 限制条件
- Minimum substrate temperature 5 °C Maximum permissible moisture content of concrete substrate 5% Minimum temperature for mixing +10 °C min. Minimum temperature for curing +10 °C min. / +35 °C max. Minimum adhesion strength of pre-treated substrate >1.5N/ mm2 Consumption: It is recommended to apply SPARCO ElectroShield SL 110 minimum 2.25 kg binder with or without + 0.25 kg quartz sand. For…
摘自技术资料表(TDS)。施工前请与我们的技术团队确认完整规格。
适用领域
相关产品
EpoxyPolyurethaneWater-based Screed
Sparco 3-C Polyurethane Screed
水性聚氨酯地坪砂浆层
SPARCO 3-C Polyurethane Screed 是一款水性多色混合型砂浆层系统，具有良好的找平性能与高耐化学性。
EpoxySolvent-free Primer
Sparco Epoxy Bonding Primer #100
无溶剂环氧底漆
SPARCO EPOXY BONDING PRIMER #100 是一款中等粘度的无溶剂配方环氧底漆，适用于干燥或潮湿表面施工，是混凝土底漆、沥青表面底漆及金属表面处理的理想选择。
向我们的技术团队咨询Sparco ElectroShield SL 110
获取Sparco技术团队提供的产品建议、用量估算或现场专属建议。