Sparco ElectroShield SL 110
Sơn epoxy dẫn điện không dung môi (ESD)
SPARCO ElectroShield SL 110 là hệ sàn epoxy hai thành phần, không dung môi, hiệu năng cao dành cho các khu vực cần bảo vệ chống tĩnh điện (ESD). Hệ thống này kết hợp khả năng kháng hóa chất tuyệt vời với độ bền cơ học cao cho sàn ESD. Đây là lựa chọn xuất sắc để thi công dạng tự san phẳng với độ dẫn điện lâu bền.
Thông tin kỹ thuật
- Công dụng
- SPARCO ElectroShield SL 110 is recommended for the various applications:; Dissipative/ESD- compliant; Electronics facilities and Data Centres; High resistant to mechanical and chemical loading; Antistatic flooring and walls; Electromagnetic interference (EMI) and radio frequency interference (RFI) shielding; Pharmaceutical facilities, Aerospace Hangers; Warehouses and Storage areas.
- Đặc tính
- High bond strength on concrete substrates; Solvent-free, Low VOC formulation; Electrostatically Conductive; Durable, seamless, and easy to clean; Excellent adhesion to mechanically cleaned surfaces; Excellent impact and chemical resistant coatings.
- Chuẩn bị bề mặt
- Substrate must be dry, sound, clean, and free from oil, grease, loose material, surface contaminants and other bond-inhibiting materials.; Concrete substrates must be prepared mechanically by ball blasting, milling or diamond grinding.; Weak concrete must be removed, and surface defects such as blowholes and voids must be fully exposed. >>Any imperfections such as cracks, holes, and gouges should…
- Định mức
- It is recommended to apply SPARCO ElectroShield SL 110 minimum 2.25 kg binder with or without + 0.25 kg quartz sand. For Aesthetic demands, per coat (film thickness approximate 1.5 mm). Approximate 5 to 8 m²/L at 75 μm DFT. Coverage may vary slightly depending on the surface porosity of the substrate and surface conditions.
- Đóng gói
- Product Packaging SPARCO ElectroShield SL 110 Part A: 16 KG/ Part B: 4 KG (per set).
- An toàn
- PRECAUTION After hardening thoroughly, SPARCO ElectroShield SL 100 is physiologically harmless. Keep the resin and hardener away from the eyes, mouth and skin. Do not breathe in the vapours. The uncured mixture can cause irritation of the skin. For best protection, wear rubber or plastic gloves. In case of contaminant, wipe away resin or hardener immediately from skin using paper towels and then…
- Hạn chế
- Minimum substrate temperature 5 °C Maximum permissible moisture content of concrete substrate 5% Minimum temperature for mixing +10 °C min. Minimum temperature for curing +10 °C min. / +35 °C max. Minimum adhesion strength of pre-treated substrate >1.5N/ mm2 Consumption: It is recommended to apply SPARCO ElectroShield SL 110 minimum 2.25 kg binder with or without + 0.25 kg quartz sand. For…
Trích từ tài liệu kỹ thuật (TDS). Vui lòng xác nhận thông số đầy đủ với đội ngũ kỹ thuật của chúng tôi trước khi thi công.
Phù Hợp Cho
Sản Phẩm Liên Quan
Epoxy SF Bonding Primer #104
Sơn lót kết dính gốc epoxy
Sơn lót kết dính được phân loại trong Bảng Dữ liệu An toàn (SDS) của nhà sản xuất là hệ thống gốc epoxy. Bảng dữ liệu kỹ thuật (TDS) đầy đủ có sẵn theo yêu cầu qua biểu mẫu liên hệ.
Sparco 3-C Polyurethane Screed
Lớp vữa tự san sàn polyurethane gốc nước
SPARCO 3-C Polyurethane Screed là hệ lớp vữa hỗn hợp (hybrid) gốc nước với nhiều màu sắc khác nhau, có khả năng tự san phẳng tốt và khả năng kháng hóa chất cao.
Sparco Epoxy Bonding Primer #100
Sơn lót epoxy không dung môi
SPARCO EPOXY BONDING PRIMER #100 là sơn lót epoxy không dung môi, độ nhớt trung bình. Phù hợp thi công trên bề mặt khô hoặc ẩm. Đây là lựa chọn lý tưởng cho sơn lót bê tông, sơn lót bề mặt nhựa đường và bề mặt kim loại.
Hỏi đội ngũ kỹ thuật của chúng tôi về Sparco ElectroShield SL 110
Nhận đề xuất, ước tính định mức sử dụng hoặc tư vấn theo điều kiện công trường từ đội ngũ kỹ thuật của Sparco.