Sparco Epoxy Thixotropic Compound

技术细节

用途

SPARCO EPOXY THIXOTROPIC COMPOUND is recommended for the various applications:; Fiber cement; Hard Natural Stone; Ceramics; Wood; Polyester, Epoxy; Glass; Bricks, Mortar, Masonry.

特点

High bond strength on concrete, brick, masonry substrates; Hardens without shrinkage; Good abrasion resistance; Impermeable to Liquids and water vapour; Durable, seamless; Excellent adhesion to mechanically cleaned surfaces; Excellent impact and good chemical resistant.

表面处理

Substrate must be dry, sound, clean, and free from oil, grease, loose material, surface contaminants and other bond-inhibiting materials.; Concrete substrates must be prepared mechanically by ball blasting, milling or diamond grinding.; Weak concrete must be removed, and surface defects such as blowholes and voids must be fully exposed. >>Any imperfections such as cracks, holes, and gouges should…

理论用量

As guide, the consumption is approximately up to 1.90 kg/m² per mm of thickness; subject to conditions and porosity of the concrete.

包装

Product Packaging SPARCO EPOXY THIXOTROPIC COMPOUND Part A: 4 or 8 KG/ Part B: 2 or 4 KG (per set).

安全

PRECAUTION After hardening thoroughly, it is physiologically harmless. Keep the resin and hardener away from the eyes, mouth and skin. Do not breathe in the vapours. The uncured mixture can cause irritation of the skin. For best protection, wear rubber or plastic gloves. In case of contaminant, wipe away resin or hardener immediately from skin using paper towels and then wash with soap and water…

限制条件

Minimum substrate temperature 10 °C Maximum permissible moisture content of concrete substrate ** Minimum temperature for mixing +10 °C min. Minimum temperature for curing +10 °C min. / +30 °C max. ** Substrate must be dry or mat damp (no standing water). Brush the adhesive well into the substrate. Consumption: As guide, the consumption is approximately up to 1.90 kg/m² per mm of thickness;…

摘自技术资料表(TDS)。施工前请与我们的技术团队确认完整规格。

适用领域